Skip to content
HVAC Kennesaw GA — Heating & Cooling logo

HVAC Service in Kennesaw, GA

Heating Repair in Kennesaw, GA

No heat during a North Georgia cold snap? We repair every kind of heating system — and we test the real cause before we recommend a part.

Same-day service across Kennesaw & Acworth — 24/7 during ice storms and heat waves.

Licensed technician repairing a home heating system during a cold snap in Kennesaw, GA

Heating repair in Kennesaw covers more than furnaces. Homes here run gas furnaces, electric furnaces, heat pumps, and heat-strip backup, and each fails differently in our ice-storm winters. Our licensed technicians diagnose the actual system you have, show you the reading behind the diagnosis, and give you a written price before any chargeable work begins.

When the heat quits during a freeze, a vulnerable resident or frozen pipes make it urgent — so we answer the phone 24/7 and run priority dispatch during cold snaps across Kennesaw and Cobb County. Most repairs are finished the same visit because we stock the common parts on the truck.

Heating Repair in progress at a Kennesaw, GA home by a licensed HVAC technician

Signs your heating system needs repair

Call us if you notice any of these — several together usually means don't wait:

  • No heat at all, or air blowing but never warm
  • The system short-cycles — turning on and off every few minutes
  • Weak or uneven heat, with some rooms far colder than others
  • Burning, musty, or electrical smells when the heat runs
  • Loud banging, rattling, or clicking at startup
  • A heat pump that ices over and won't defrost
  • Heating bills climbing with no change in use

How our heating repair visit works

You'll know the arrival window, the diagnostic fee, and the repair price before we start.

  1. 1

    Safe triage & arrival

    We confirm the window and diagnostic charge, then check the thermostat, power, and any safety concern like a gas smell or electrical odor first.

  2. 2

    Full-system diagnosis

    We test ignition, flame sensor, heat exchanger, controls, airflow, and — on heat pumps — the reversing valve and defrost cycle, instead of swapping parts on a hunch.

  3. 3

    Written options & your approval

    We explain the diagnosis in plain English, show you the reading, and give you written repair options. Nothing chargeable happens until you approve the price.

  4. 4

    Repair, test & clean up

    We complete the approved repair, verify safe operation and a proper temperature rise, and document the parts and readings.

Every heat source we repair

Because "heating" means different equipment in different homes, we repair all of it. For gas and electric furnaces, see our dedicated furnace repair page. For heat pumps that heat and cool, our heat pump service covers reversing-valve and defrost problems. And when the heat is out during a freeze, our 24/7 emergency furnace repair runs priority dispatch.

Whatever you have, we diagnose the real cause first — a no-heat call can be a failed igniter, a tripped safety, a bad control board, a clogged flame sensor, a reversing-valve fault, or a simple thermostat issue, and they are not interchangeable.

Why North Georgia heating systems fail

Our heating season is short but sharp. Systems sit mostly idle through the fall, then get asked to run hard during the first freeze or an ice storm — and that's exactly when weak igniters, dirty flame sensors, and marginal capacitors give out. Heat pumps that work fine in mild weather can ice over and struggle to defrost when temperatures drop into the 20s.

A fall heating check catches most of these before they strand you. If yours was skipped and the heat quits, call — we keep the common parts stocked so most repairs finish the same visit.

What heating repair costs in Kennesaw

Published Atlanta-area research puts most furnace and heating repairs around $130–$650, depending on the part. These are context ranges, not a quote — a flame sensor is far cheaper than a control board or heat exchanger.

We publish our diagnostic policy up front and tell you whether it applies toward the repair, so you're never guessing at the final number.

What affects your price:

  • The failed component — igniter and sensors are inexpensive; control boards and heat exchangers are not
  • System type — gas furnace, electric furnace, or heat pump
  • Whether the fault is isolated or part of an aging, repeat-failure system
  • Accessibility of the equipment (attic, crawl space, tight closet)
  • Emergency or after-hours timing during a freeze

Why Kennesaw homeowners choose HVAC Kennesaw GA for heating repair

We’ve spent 15+ years on Cobb County’s systems, and it shows in how we handle a heating repair call: we test first, explain the reading, and put the price in writing before we touch anything chargeable.

  • 4.9★ from 214+ Kennesaw & Cobb County homeowners
  • GA Licensed Conditioned-Air Contractor · EPA Section 608 Certified Technicians
  • Written options and your approval before any chargeable work
  • Same-day service across Kennesaw & Acworth — 24/7 during ice storms and heat waves.

4.9★ Rated

214+ local reviews

Licensed & Insured

GA conditioned-air · EPA 608

24/7 Emergency

Same-day across Kennesaw

15+ Years

Serving Cobb County

Heating Repair across Kennesaw & Cobb County

We bring heating repair to homes and businesses throughout Cobb County — from Acworth and Marietta to the East Cobb and West Cobb subdivisions, plus every Kennesaw neighborhood. We’re dispatched from 3600 Kennesaw N Ind Pky, so response times stay short across the area.

Frequently Asked Questions

How much does heating repair cost in Kennesaw, GA?
Published Atlanta-area research puts most heating and furnace repairs around $130–$650, depending on the part. A flame sensor or igniter is inexpensive; a control board or heat exchanger costs more. We test first, show you the reading, and give you a written price before any chargeable work — call +1 (327) 210-5999.
My heat isn't working — what should I check before I call?
Confirm the thermostat is set to heat and above room temperature, check that the furnace switch and breaker are on, and make sure the filter isn't completely clogged. Check the breaker once — repeated resets aren't a repair and can be unsafe. If you smell gas or burning, leave it off and call right away.
Should I repair or replace my heating system?
Age alone doesn't decide it. If the fault is isolated and the system is otherwise reliable, a repair is usually smart. If failures repeat, the heat exchanger is cracked, or the system is well past 15 years, we'll walk you through replacement options with a load calculation — no pressure.
Do you offer emergency heating repair?
Yes — we answer the phone 24/7 and run priority dispatch during freezes and ice storms across Kennesaw and Cobb County. If you have no heat with a vulnerable resident at home or a risk of frozen pipes, call +1 (327) 210-5999 anytime.
Why does my furnace keep turning on and off (short cycling)?
Short cycling can come from an overheating limit switch, a dirty flame sensor, a clogged filter, an oversized furnace, or a flue problem. It wastes fuel and wears the system, so it's worth diagnosing. Our guide on furnace short cycling explains the causes, and we can test yours and fix the root issue.

Get heating repair you can trust in Kennesaw

Same-day service across Kennesaw & Acworth — 24/7 during ice storms and heat waves.

3600 Kennesaw N Ind Pky, Kennesaw, GA 30144

Heating Repair across Kennesaw & Cobb County

We bring this service to every community we cover — including your Kennesaw neighborhood.

Related Services

Helpful Reading

Call NowFree Quote